Liquid-Cooled Condenser Kit for Gen 3

$300.00

Improve your solvent recovery process by retrofitting the CMEP-OL with our EGI Liquid-Cooled Condenser (LCC).

HOW DO I  BENEFIT?  When properly installed, you will experience an improved recovery rate, reduced noise pollution, longer compressor life expectancy, reduced internal head pressure, lower back pressure, decreased stress on internal components, fewer hoses, fewer connections.

Call us at (530) 378-4443 for details on how we can convert your CMEP-OL for YOU in our factory-trained service department.

For additional information on The LCC operation, be sure to view our Recommendations For Recirculating Coolant” listed in the product description below.

INSTALLATION INSTRUCTIONS

Out of stock

SKU: LCC300 Categories: ,

Description

KIT CONTENTS: 1- EGI Liquid-cooled condenser coil-in-box (custom built for CMEP-OL), 1-”U-shaped” tube w/ compression fitting  ends, 2-PTFE lined stainless steel braided hoses with threaded compression endings, 1 pair of compression fittings, 4-bolts, 4-washers, and 4-nuts. The LCC condenser hose box connections are 1/4″ FNPT in size.

TESTED and APPROVED:  Please keep in mind that every liquid-cooled condenser (LCC) is pressure tested on-location to ensure that it holds up to 150 PSI without leaking.

…And we will include 2 FREE barbed 1/4″ MNPT 304 stainless steel hose fittings, as a THANK YOU for choosing EcoGreen Industries as your quality supplier!

 

Recommendations For Recirculating Coolant

On a limited budget? Use ice (or dry ice) and water as your coolant. For recirculating your liquid through the LLC, we recommend that at a minimum you use a basic pond or waterfall pump that circulates a minimum of 200 gallons of liquid per hour.

Got a bigger budget?  We recommend that you use a recirculating chiller with a minimum cooling power of 500 watts (.5 kilowatts) for each CMEP-OL in operation.  Use a recirculating chiller that has a increased cooling power when using multiple CMEP-OL’s.  When striving for those really cold temperatures, we recommend using Dylanene HC-50 (-150F freezing point), ethylene glycol (-80F freezing point), or propylene glycol (-50F freezing point) as your coolant.

Additional information

Weight 9.1 lbs
Dimensions 12.5 x 10 x 10 in

You may also like…